1. Openthe RLinkPlatform.Clicking “Login to the Account” will automatically
redirect you to the login page.Log in to the account bound to the RLink Lite device.
Note: After binding and activating the device and downloading the driver, you can use the RLink Lite device to perform vehicle diagnostics without opening the RLink Platform later.
2. Click the settings icon. Then click About to check whether there is an update for the RLink Platform. If yes, click Update.
3. Click Driver Management > Driver Download.
Note:Download the corresponding driver according to the OEM software. Do not download drivers that are not related to the OEM software.
4. Click BMWand click Downloadto download the driver.
5. Click DriverManagement > Driver Info. Then click BMW to configure the driver mode.
6. There are two driver modes for BMW.
To use RLink Lite device forE chassis vehicle diagnostics, select RLinkIFH(E) mode.
To use RLink Lite device forF/G chassis vehicle diagnostics, select RLinkENET(F/G) mode.
To use the original ICOMdevice for diagnostics, select ICOMmode (restore the original driver mode).
7. Double click the icon to open the ISTAD.
8. The ISTAD connection order is as follows:
Please refer to the connection instruction video:
If you encounter any problems, you can send an email to support@topdon.com.
1. Open the RLink Platform and click Login, it will automatically jump to the login screen upon the first use. Log in to the account bound to the RLink device. Note: For BMW models, it is necessary to open the RLink Platform to activate the driver, ...
RLink Platform Installation, Account Registration and Device Activation Steps (For RLink Lite and RLink J2534) Unzip the software package → Double-click the package to install → Register (if you have registered an account on the RLink Lite, you can ...
Unzip the software package → Double-click the package to install → Register (if you have registered an account on the RLink Lite, you can directly log in) → Fill in the information → Log in to the account → Bind and activate the device 1. Unzip the ...
Unzip the software package → Double-click the package to install → Register (If you have already registered an account, you can log in directly.) → Fill in the information → Log in to the account → Bind and activate the device 1. Unzip the RLink ...
BMW OEM Software with RLink J2534 Connection Instructions Tips:You need to install the BMW OEM software before use. If it's not installed yet, you can download and install it from the official BMW website. https://bmwtechinfo.bmwgroup.com/ Open the ...