LANDROVER OEM Software with RLink Lite Connection Instructions

Tips：You need to install the LANDROVER OEM software before use. If it's not installed yet, you can download and install it from the official LANDROVER website.

https://topix.jaguar.jlrext.com/topix/vehicle/lookupForm

1. Open the RLink Platform.Clicking “Login to the Account” will automatically

redirect you to the login page.Log in to the account bound to the RLink Lite device.

Note: After binding and activating the device and downloading the driver, you can use the RLink Lite device to perform vehicle diagnostics without opening the RLink Platform later.

2. Click the settings icon. Then click About to check whether there is an update for the RLink Platform. If yes, click Update.

3. Click Driver Management > Driver Download.

Note:Download the corresponding driver according to the OEM software. Do not download drivers that are not related to the OEM software.

4. Click LANDROVER and click Download to download the driver.

5. Click Driver Management > Driver Info. Then click LANDROVER to configure the driver mode.

6. There are two driver modes for LANDROVER.

To use RLink Lite device for diagnostics, select RLink mode.

To use the original JLR-VCI device for diagnostics, select JLR-VCI mode (restore the original driver mode).

7. Double click the icon to open the Pathfinder. Then log in to your account.

Note: Pathfinder does not support the J2534 diagnostic standard.

8. Choose RLink driver mode following the order below.

9.Click Detect Vehicle to start vehicle diagnostics.

10. Double click the icon to open the JLR-SDD software.

11. Log in to the account. It will automatically connect to Rlink. Then click Auto VIN Read for diagnostics.

If you encounter any problems, you can send an email to support@topdon.com.

• Related Articles

• LANDROVER OEM Software with RLink Connection Instructions

  1. Open the RLink Platform and click Login, it will automatically jump to the login screen upon the first use. Log in to the account bound to the RLink device. Note: After binding and activating the device and downloading the driver, you can use the ...

• FORD OEM Software with RLink Lite Connection Instructions

  Tips：You need to install the FORD OEM software before use. If it's not installed yet, you can download and install it from the official FORD website. https://www.fordserviceinfo.com/ 1. Open the RLink Platform.Clicking “Login to the Account” will ...

• LANDROVER OEM Software with RLink J2534 Connection Instructions

  Tips：You need to install the LANDROVER OEM software before use. If it's not installed yet, you can download and install it from the official LANDROVER website. https://topix.jlrext.com/topix/ui/mylinks 1. Open the RLink Platform.Clicking “Login to ...

• LANDROVER OEM Software with RLink X7 Connection Instructions

  Tips：You need to install the LANDROVER OEM software before use. If it's not installed yet, you can download and install it from the official LANDROVER website. https://topix.jaguar.jlrext.com/topix/vehicle/lookupForm 1. Open the RLink ...

• BMW OEM Software with RLink Lite Connection Instructions

  Tips：You need to install the BMW OEM software before use. If it's not installed yet, you can download and install it from the official BMW website. https://bmwtechinfo.bmwgroup.com/ 1. Open the RLink Platform.Clicking “Login to the Account” will ...