RLink Platform Installation, Account Registration and Device Activation Steps
Unzip the software package →
Double-click the package to install →
Register an RLink account →
Fill in the information step by step according to the registration details →
Log in to the account →
Bind and activate the device
1. Unzip the RLink Platform software package.
Note:
For computers with high security, a prompt requiring administrator rights will appear when opening the driver, simply click Yes.
It is recommended to disable antivirus software during installation. Because RLink Platform is the driver management platform for OEM software. It may be mistakenly removed by antivirus software. This driver will not have any adverse effects on the computer.
3. Click Login to the Account as shown in the figure below, and the login page will appear. Click sign up to register an account.
4. Follow the instructions to sign up your TOPDON account.
4.1 Enter your commonly used email address.
4.2 Click Get Verification Code. Then enter the verification code received in your email (email verification information, as shown in Figure 4.7)
4.3 Enter a password you can remember.
4.4 Enter the password you set again.
4.5 Read the User Agreement and Privacy Policy carefully and check the Accept box.
4.6 Click SIGN UP. Registered successfully. It will jump to the login page.
5. Enter the account and password you registered. Then click Login to login to the RLink Platform.
6. Log in to the RLink Platform. Then connect the RLink J2534 device to the computer and the vehicle's OBD port to bind and activate the device.
7. After the RLink J2534 device is successfully bound to the RLink Platform account, enter Driver Management to download the driver.
OEM Software Driver Download and Settings
After the device is activated, download the specific driver for the OEM diagnostic software. Note: To avoid driver incompatibility, do not download drivers that are not related to the OEM software.
1. Follow the order below to check if there is an available update for RLink Platform. Click Update if there is an available version.
2. Click Driver Management > Download to download the specific driver for theOEM diagnostic software. To avoid driver incompatibility, do not download drivers that are not related to the OEM software.
3. Follow the order below (4-5-6-7-8) to choose and download the driver. (For example, if you are using the FORD OEM software, download the FORD driver.)
4. After downloading the driver, open FDRS for diagnostic programming.
If you encounter any problems, you can send an email to support@topdon.com.
Related Articles
RLink Platform Installation, Account Registration and Device Activation Steps
RLink Platform Installation, Account Registration and Device Activation Steps (For RLink Lite and RLink J2534) Unzip the software package → Double-click the package to install → Register (if you have registered an account on the RLink Lite, you can ...FAQ about RLink Platform Installation and Login
Q: Can I turn off the automatic startup function of the RLink Platform? A: Yes. Click the settings icon and click General. Choose No under the Run Automatically at Startup option. Q: Why is the RLink Platform removed by antivirus software during ...FAQs about RLink Platform Installation and Login
Q: Can I turn off the automatic startup function of the RLink Platform? A: Yes. Click the settings icon and click General. Choose No under the Run Automatically at Startup option. Q: Why is the RLink Platform removed by antivirus software during ...Phoenix Series Products No-Login Activation Instructions
Overview: The latest versions of certain products within the Phoenix series have introduced a new method for device activation. Previously, activation was conducted via email to generate an account. However, it has now transitioned to email ...RLink Platform Software Download Guide
RLink Platform Software Download Guide 1. Log in to the TOPDON official website: https://www.topdon.com/ 2. Click Diagnostic Tools from the home page. 3. Click RLink Lite or RLink J2534. 4. Click Download. 5. Click the icon to download the RLink ...