VW/AUDI OEM Software with RLink X7 Connection Instructions

VW/AUDI OEM Software with RLink X7 Connection Instructions

Tips：You need to install the VW/AUDI OEM software before use. If it's not installed yet, you can download and install it from the official VW/AUDI website.

VW:https://erwin.vw.com/erwin/showHome.do

AUDI:https://erwin.audiusa.com/erwin/showHome.do

1. Open the RLink Platform.Clicking “Login to the Account” will automatically

redirect you to the login page.Log in to the account bound to the RLink X7 device.

Note: After binding and activating the device and downloading the driver, you can use the RLink X7 device to perform vehicle diagnostics without opening the RLink Platform later.


2. Click the settings icon. Then click About to check whether there is an update for the RLink Platform. If yes, click Update.


3. Click Driver Management > Driver Download.

Note:Download the corresponding driver according to the OEM software. Do not download drivers that are not related to the OEM software.

4. Click VW and click Download to download the driver.


5. Click Driver Management > Driver Info. Then click VW to configure the driver mode.


6. There are two driver modes for VW.

To use RLink X7 device for diagnostics, select RLink mode.

To use the original 6154/5054 device for diagnostics, select VAS5054/VAS6154 mode (restore the original driver mode).


7. Double click the icon to open the ODIS.


8. Choose RLink driver mode following the order below.


9. After the VIN is detected, click Start diagnosis.


If you encounter any problems, you can send an email to support@topdon.com.

    • Related Articles

    • VW/AUDI OEM Software with RLink Lite Connection Instructions

      Tips：You need to install the VW/AUDI OEM software before use. If it's not installed yet, you can download and install it from the official VW/AUDI website. VW:https://erwin.vw.com/erwin/showHome.do AUDI:https://erwin.audiusa.com/erwin/showHome.do 1. ...

    • VW OEM Software with RLink Connection Instructions

      1. Open the RLink Platform and click Login, it will automatically jump to the login screen upon the first use. Log in to the account bound to the RLink device. Note: After binding and activating the device and downloading the driver, you can use the ...

    • VW OEM Software with RLink J2534 Connection Instructions

      Tips：You need to install the VW OEM software before use. If it's not installed yet, you can download and install it from the official VW website. https://erwin.vw.com/erwin/showHome.do 1. Open the RLink Platform.Clicking “Login to the Account” will ...

    • BMW OEM Software with RLink Connection Instructions

      1. Open the RLink Platform and click Login, it will automatically jump to the login screen upon the first use. Log in to the account bound to the RLink device. Note: For BMW models, it is necessary to open the RLink Platform to activate the driver, ...

    • PORSCHE OEM Software with RLink Connection Instructions

      1. Open the RLink Platform and click Login, it will automatically jump to the login screen upon the first use. Log in to the account bound to the RLink device. Note: After binding and activating the device and downloading the driver, you can use the ...